Thursday, 19 November 2026

Fokker E-IV

 

This is the Fokker E-IV, the successor to the infamous E-III Eindekker that had reaped a swathe through the aircraft of the Entente in 1915 and early 1916.

The E-IV got a more powerful (and heavier) engine, and two machine-guns instead of the single gun of the E-III. One of the famous German aces, I forget exactly which one, even experimented with mounting three guns. However, even two guns proved to be too much for the E-IV to carry. It did not improve on its predecessor in speed or climb in spite of the more powerful engine, and the lengthened fuselage necessary to cope with its altered centre of gravity meant that it was also considerably less nimble. It was, in short, a failure.

This is a 1:144 scale model, printed in resin on my Mars 5.


 

 

Next day...

Here's another, this time in the green and brown disruptive scheme the Germans adopted towards the end of 1915, when it had been learned how dreadfully visible aircraft were, both from the air and from the ground. This was a period before it became commonplace for fighter pilots to have their personal aircraft painted in all sorts of bright colours and patterns.


 

Nexter day...

I've done a pre-production variant of my Fokker E-IV with the three-gun mount.
Apparently the triple interruptor system failed and shot off the propeller, and Oswald Boelcke removed the left-side gun and went to a more robust double interrupter which remained standard on German twin-gun fighters thereafter.
 

Wednesday, 18 November 2026

Dieselpunk Land Dreadnought


 I've been updating my old Land Dreadnought model for home printing, for use with 15mm figures. It was originally on Shapeways, before that site went tits-up, and even in its 6mm version it cost a bajillion dollars.

Now I've put it up at https://www.wargaming3d.com/product/mojobob_hoochyman_dieselpunk_land_dreadnaught for much, much less money.


Components

 Even if sized for 15mm figures, it's a big model — about 200mm long. If you wanted to use it for 28mm, you can pretty much double that.

I've made a couple of different sub-turret types: one has a dual-machine-gun armament, while the other has a short howitzer-style gun. You can mix and match them to fill the five sub-turret sockets with the configuration of your choice.

The main gun can be added at any elevation, but it has to be glued in place, so the elevation isn't adjustable thereafter. The running gear modules also have to be glued in place. All of the turrets, however, can be left free to rotate, if that is desired.

The Many Faces of Lozenge

 

I've made my first attempt at 4-colour lozenge pattern on this OFAG Albatros D-III (top). I've included a 5-colour pattern (bottom) for comparison.

I've stencilled the dark blue over an olive green base coat, and that leaves me with only two more colours to paint in. So in that sense, it's easier than the 5-colour pattern.

However, I just don't like it as much. It's not as pretty. It's all dull and gloomy, and not sparkly and lively. I know that's no reason not to use it, but the heart wants what the heart wants.


 I'm not a close student of the WW1 lozenge disruptive patterns, so I don't yet know the actual history of where or when or why the patterns changed. I probably should look into that, because it's always good to know things.

Sunday, 15 November 2026

Halberstadt Update

 

Working with the crappy old FDM Halberstadt led me to make some changes to my digital model. Nothing major, I've just added some fuselage ribbing.

Stencilling

 

I'm experimenting with painting some German crosses by stencilling, using a 3d printed stencil on this 1:144 scale FDM printed Halberstadt D-II that I dragged out of the "seconds" bin of prints that are imperfect, but not bad enough to throw away.

The cross on the left was sprayed through the stencil and the white surround painted in by brush, the one on the right was drawn in pencil on a white background and then the black painted in by brush. 

The spraying works pretty well, better than I expected. I think I would be best served by making a dedicated stencil for each aircraft so that it can be located accurately and more or less automatically in the right place. Trying to locate the stencil shown here is a bit tricky, partly because of its shape, but also because it's opaque and covers up the wing beneath. 

The stencils themselves would be better in an adhesive masking film, but that's a bit tricky in itself. Or, if 3d printed, being printed with a 0.2mm nozzle would help with sharper internal angles. 

The pencilled stencil is okay too; the painting isn't difficult. However, the stencil would need to be adjusted to accommodate the thickness of the pencil lead — you can see how much thinner that cross looks that the one that was sprayed on.


 Here's another one, also out of the seconds bin, this time with the later outlined crosses.


 This one's markings were painted with a stencil I created with locating lugs specifically to locate the markings on the wings of this particular model, and temporarily fixed in place for spraying with a patch of double-sided tape. It made it much easier to handle.

The crosses were sprayed on to a white background, and the outlines then painted-in with the background colour. 

State of the Nation (bench)


 The current state of my modelling bench. It's not as bad as it has been in the past, but the available working space is dwindling, so it's probably time for a tidy-up and reorganisation.

Friday, 13 November 2026

V1 Flying Bomb

 

Not a lot of use on the wargaming table, but that's no reason not to have one.

This is a teensy 1:144 scale V1 flying bomb, from Decapod on Thingiverse if my memory serves.

The Tempest is a model I made a few years ago. 

Thursday, 12 November 2026

SE5a

 

This 1:144 scale SE5a was, I think, the first WW1 aeroplane I modelled in Blender, and it does show a bit. It's not terrible, as a gaming model, but it could be quite a bit better.

Wednesday, 11 November 2026

Nieuport 17

 

This is a 1:144 scale print of the Nieuport 17 in French colours.

It was one of the most widely used French scouts of 1917, employed by every member of the Entente alliance. It replaced the Nieuport 11 Bebe and Nieuport 16, being the first of them to have an interrupted Vickers gun mounted as its standard armament. Some pilots, however, preferred to stick with the wing-mounted Lewis gun that they were used to, and quite a few Nieuport 17s were to be seen sporting that gun mount.

The aluminium dope was, I believe, used mainly because it provided UV protection to the canvas fabric. I've found that I have to give the metallic paint a few coats of matte varnish, or else it looks too shiny — you can see the difference between the paint finish on the wings, which have been varnished, and the engine cowling, which has not.

And now, looking at the photo, I realise that I've forgotten to paint the wooden interplane struts. Back to the painting desk we go! 

Monday, 9 November 2026

Lozenge Painting

 

Painting the German WW1 lozenge pattern in 1:144 scale isn't actually all that difficult. The exact geometric shape of the individual lozenges isn't all that important in this small scale, as they really just resolve visually to fairly indistinct blobs anyway.

What is more important is the relative size of the individual blobs of colour, and their spacing relative to each other. Having a more or less accurate starting point makes that a whole lot easier.

To that end, I've made these FDM 3d printed airbrush templates to help me along my way. This is the template for the gold lozenges only, and they'll provide the guide for all the other colours. 

I suppose you could make templates for all of the colours, but I think in the end it would be more trouble than it was worth. 

I can only really use the templates on the more-or-less flat upper surfaces, but that gives me the visual reference I need to fill in the others as well.

I'd like to try laser-cutting similar templates — they could be cut in a self-adhesive masking tape or something, which would make handling easier, and it would be more feasible to create individual mask shapes for other parts of the model such as the fuselage sides, and even maybe the lower wings.


 A wee bit later...

I realised that the lozenge-printed fabric would have been laid on to the aircraft in strips, running longitudinally, so the resulting pattern should look more like this.

Oh well, next time maybe. 

Sunday, 8 November 2026

Hannover CL-III

 

I've been digitally replicating another old Airfix kit that I built about a hundred years ago, this time the Hannover CL-III, as usual in 1:144 scale. It was sometimes described as the German equivalent of the Bristol Fighter, but in truth it was never as dangerous an opponent as that British machine.


 Here's my Airfix Hannover, in 1:72 scale. I painted it before I had any real idea of how the lozenge camouflage fabric used by the Germans in WW1 actually looked, and though I don't think it's too terrible as an impressionist approximation, it's just a grid of hexagons, not the asymmetrical lozenges that were actually used. 

It took forever to paint though. 


 A couple of days later...

And here's my 1:144 3d print of the model.  I think it turned out not too badly.

Thursday, 5 November 2026

Bristol M1C "Bullet"

 


The Bristol M1C Monoplane, nicknamed the Bullet for its relatively high speed for the time, made its maiden flight in July 1916. It suffered from an institutional distrust among the British hierarchy of monoplanes, and just 130 were built, of which only one went to France, probably for evaluation purposes only. Most of them were sent to Palestine.

Of the many criticisms levelled at it to keep it out of front line service, only one was really valid, and that was that it had too limited an endurance for escort duties. It was faster than any of its contemporaries, which led to yet another criticism by the brass, that its landing speed of 60mph was dangerously fast. 

As usual, I've designed this at 1:144 scale, and it should be printable by FDM, though I do all my aeroplanes in resin now that I have a more reliable printer. 

The STL is available at https://www.wargaming3d.com/brands/mojobob-hoochyman 


Next day...

I've added a later version, with a ventilation hole pierced in the slightly smaller spinner, and the framing removed from the wing-root view-ports to improve the pilot's downward visibility.

In hot climates, the whole spinner was often removed. 


 And the next...

Here's the first 3d print, painted up in European colours. 


 And the second. This one would be more appropriate for Palestine, where the Bullet saw the most of its service.

Wednesday, 4 November 2026

Sopwith Salamander

 

These are 1:144 scale Sopwith Salamanders, a British armoured ground-attack aircraft from the very end of WW1, based largely on the Snipe. They were ordered in quantity in order to support the offensives intended for 1919, but the Armistice intervened, and in the end only two ever made it to the Western Front.

It was used as a test-bed for a new (to the British) multi-colour disruptive paint scheme. As well as the camouflage, new low-visibility markings were  trialled: the red and blue of the roundels were desaturated, and the white ring replaced with the same pale grey-green used on the fuselage sides. The white outer ring was done away with entirely, and the roundels were applied asymmetrically on the top wing surfaces. A normal RAF roundel was applied to the underside of the starboard lower wing. The undersides of the lower wings were painted black. No other national markings were applied anywhere on the aircraft.

I've wanted to build and paint a Salamander ever since I saw it described in an ancient Airfix Magazine back in the 1970s. And now I have two. 

Tuesday, 3 November 2026

Nieuport 11 "Bebe" (1:144)

 

Here are a couple of 1:144 scale Nieuport 11 "Bebe" from 1916, ready to go up against the Fokker Eindekkers swarming all round the place.

They really were tiny little aeroplanes. 

Monday, 2 November 2026

Eindekker and DH2

 

Someone asked me if I was going to make my DH2 and Fokker E-III models available.

To my surprise, I found that had not uploaded them already — probably because it was in the period when it was looking like I might have to shift my collection away from wargaming3d, when their payments system via PayPal went tits-up.

Anyway, I have uploaded both of them now, and they can be had at https://www.wargaming3d.com/brands/mojobob-hoochyman 



 Next day...

I've been tinkering with texturing the STLs in Blender, and working with PNGs as digital decals. For some reason they don't render with transparency in Cycles, but fortunately EeVee has improved enormously over the last couple of years, so I can just use that.

I'm pretty sure I'm not going about things in the best or most efficient way.  But never mind, it's just for fun. 

Sunday, 1 November 2026

Bebe

 

Courtesy of insomnia, I've put together this 1:144 scale model of a Nieuport 11 Bebe. Another scout for the Entente to put up against those blasted Fokkers.

This little sesquiplane went into service on the French front in January, 1916. It outclassed its main opponent, the Fokker E-III monoplane, in every respect: speed, climb, agility and strength. The French did not, at that time, have an interruptor system for the gun, so it carried a single Lewis gun high on it's top wing, to fire over the propeller. By March 1916, it was being replaced by the Nieuport 16 with a more powerful engine, and the much improved Nieuport 17. It, and all of its successors, went into service with all of the Entente powers of WW1.

This model is designed at 1:144 scale, with tolerances suitable for FDM printing, though of course it can also be printed in resin. It includes a 2.6mm diameter socket in its belly for a flight stand.