Sunday 20 March 2022

6mm Napoleonic Brits (3d printed)

 

I've printed some of Henry Turner's 6-15mm Napoleonic British sculpts at 6mm on my Mars Pro, and made some 40mm two-rank sabot bases for them on my Ender 3. I like his proportions for 6mm, but I find them just a tad too chunky and dwarfish for 15mm.

At the moment only the front rank strips are glued in place; they'll be painted along with the base, while the rear rank strips will be painted separately and then be glued in place. The battalion colours will also be painted separately, and then be glued in place — the colour bearers' hands can be drilled out to accept a pin, and the colours themselves will be made of paper.

There have been a few casualties amongst the muskets and bayonets when I removed the printing supports, but never mind.


These five bases would make a full medium-sized battalion for Black Powder in 6mm. The left and right bases are half-and-half line troops, with the woolen puff epaulettes, and flank troops with the swallows-nest epaulettes. The difference is visible if you look really closely, but in this scale I think differentiating them in this way is largely pointless. Nevertheless, I've got them, so I might as well use them.

I've photographed them here with some Heroics & Ros 6mm Spaniards, on 3mm MDF bases, for comparison. They are more detailed than the H&R metals, but how much of that extra detail will be visible on the wargames table is yet to be seen. I guess it will depend a lot on the quality of one's eyesight, and mine is pretty crap these days.


Couple of days later...

This is the first test base, painted and flocked. The 3d printed sabot base seems to have worked as planned; the ranks aren't perched up on little mounds as they would be if they were glued straight to a flat surface.

The figures are just block-painted over a black primer, and then sploshed with Army Painter Dark Tone which does successfully delineate a bit of the detail present in the prints — detail that will be only minimally visible at tabletop distances. It's not a painting standard that will reward close scrutiny, but they'll look okay en masse on the table.

These two strips suffered even more than most when I took the supports off, but hopefully the flags will distract from the missing bayonets.

There are a pair of colours still to go on this base; I'm waiting on some toner for my printer for those. Normally I'll print them to get some precision in the outlines, mount them on their pins, and then give the paper a bit of flowing contour and finish by painting in some shadow and highlights.

3 comments:

  1. Henry Turner not Taylor 6mm Napoleonics.

    ReplyDelete
  2. This is brilliant! Thanks so much for posting this comparison. I have thousands of Heroics & Ross napoleonics (as yet unpainted) I bought in my pre-professional life and now that retirement looms I want to get back into miniatures wargaming. I intend to get a good resin printer and had the figures from Henry Turner on my radar. You’ve confirmed that they go well together (big relief for me).

    ReplyDelete